Many cutters still find it a mystery on how to carve Opal. Artistic carvings are popular for jewelry or specimens. Opals that suit pendants look fantastic and one-off unique carved pieces are popular on jewelry and many opal specimens that might be considered as paper weights are now popular with that extra bit of carving on them.
Boulder opaI is one of the most popular opals for carving due to large sizes and unusual shapes and patterns in the opals. The opal can actually decide its fate just by looking at how it was formed and to follow colour veins in the ironstone.
Professional cutters charge $50 to $100 per hour to carve good black opal rough specimens. It is worth paying extra to get professional finish on an expensive black opal, as opal colours can be tricky to follow and polish correctly
Black opals that have thin colour bars are hard to carve, but sometimes you will find potch and colours in swirl pattern and these are ideal to practise carving on as they are not expensive but if carved correctly they can make stunning specimen.
These crystal opals are generally easy to carve and the size is not too large so the cutter can get the best polish.
Ethiopian crystal opal is easy to work with and most carvings have no potch but fully opal colours and easy to give good polish. Ethiopian Opal Specimens with Phantom inclusion inside can be carved to make unique specimen and they do look so unique on display and we are attaching interesting article on how phantom inclusions are formed.
The most popular carvings are artistic carvings or tribal designs. Many designs that look like tribal designs are popular. Tribes like Red Indians, Eskimos and Aborigine designs are popular. The next most popular design is modern artistic designs that are found in nature, designs like shells or leaves.
Animal designs are not easy to do and most opal carvings with animals are made in Asia due to labour costs to make design.
Opal Indian head carvings are very popular. They are mostly carved into boulder opal due to the large size that is required, as most are few inches’ wide
Some crystal can be carved but can be too expensive
Its best to pre form shape of an Indians head and to polish before starting dremel drill
Boulder opal with good colour ironstone with broad section of colourful opal is best but if starting just ironstone is good to you perfect the drilling and polishing of this design.
You do require full range all lapidary drills from diamond tipped pointed drills to round burrs and for polishing you also require polishing wheels a s rubber disks to wool polishing tips
Also note the feathers require delicate work and are hardest part of this Indian head carving as if not polished the result is burred look and you do need to put lot effort into carving and polished the feathers on this design
Standard saw blades and polishing wheels are required. Most opal cutters already have this equipment so they can rub or slice the opal into a rub ready for carving and polishing.
Also check that your air extraction works well when carving opal especially when drilling the opal colours.
Once you have picked out your opals that you wish to carve, you will need the following equipment:
Fixed drill out fit - Many cutters might have a dremel drill but for best results you will need fixed outfit that doesn’t move. It is important that you use both hands to hold the opal for carving.
Slow speed electric motors set up to drill, or even old dentist drill is sufficient.
Diamond tip drills from 80 to 240 grit.
Coarse drills are only required on carving out ironstone but when you work with the opal best not to use under 120 grit as 180 should be ideal for more delicate work with drills.
A large selection of lapidary tools is recommended to make professional finish.
Sanding disks -These are required to help mark out your carving design and can even be used to cut small piece off your opal.
Rubber tipped drills -These are flexible tips made of rubber impregnated with diamonds and you need following grits: 80,120,180,280.
Polishing pads -It is very important to have large variety of polishing pads or sand paper as if you are working with boulder the ironstone it is soft and will require a lot more work than the opal so it is important to have high level of even polish.
Sandpaper grit can be 50 grit to 2000 grit and diamond tip rubber.
Final polish -Wool tipped drills are best for your final polish with polishing powder compound to give high polish.
How to make a fixed drill?
If you have a dremel drill, you can set it up to be fixed by clamping onto your bench. It needs to be housed also as if you are working the rub. The boulder opal can be very messy.
Image is of foam fruit or vegetable box cased around drill. This drill is just standard electric motor with good water source and placed in foam box. An old dentist drill is also ideal, as it leaves both hands to hold and work the opal for carving.
The biggest mistake new carvers make is trying to hold dremel drill and carve and give up as the finish is not satisfactory.
The next mistake is never enough polish as you need a lot of patience and variety polishing wheels or sandpaper to get a good finish.
Drill grit is also important as coarse grit under 100 may cause the opal to chip and not give good finish
Coarse grits are good for basic work and cutting away potch or ironstone but once you work with opal colours, it is best to use above 180 grit so as not to chip or damage the opal.
Many specimens do not need carving design before but best to clean the opal and follow the veins before deciding on a design
Opal carvings needs a lot of patience to get the good finish so please be patient and wear safety mask while carving with drill or polish wheels.
Grab Your Own Rough And Start Carving
Viele Schneider finden es immer noch ein Rätsel, Opal zu schnitzen. Künstlerische Schnitzereien sind beliebt für Schmuck oder Proben. Opale, die zu Anhängern passen, sehen fantastisch aus und einmalige einzigartige geschnitzte Stücke sind auf Schmuckstücken beliebt und viele Opalproben, die als Papiergewichte in Betracht gezogen werden könnten, sind jetzt mit diesem zusätzlichen Stückchen Schnitzen auf ihnen beliebt.
Boulder OpaI ist einer der beliebtesten Opale für Carving aufgrund der großen Größen und ungewöhnlichen Formen und Muster in den Opalen. Der Opal kann tatsächlich sein Schicksal entscheiden, indem er nur betrachtet, wie er geformt wurde, und Farbvenen im Eisenstein folgen.
Professionelle Cutter berechnen $ 50 bis $ 100 pro Stunde, um gute schwarze Opal-Rohlinge zu schnitzen. Es lohnt sich extra zu bezahlen, um ein teures schwarzes Opal professionell zu bearbeiten, da Opalfarben schwierig zu folgen und richtig zu polieren sind
Schwarze Opale, die dünne Farbbalken haben, sind schwer zu schnitzen, aber manchmal findet man Pech und Farben im Strudelmuster und diese sind ideal um das Schnitzen zu üben, da sie nicht teuer sind, aber wenn sie richtig geschnitzt werden, können sie atemberaubende Muster herstellen.
Diese Kristall Opale sind in der Regel einfach zu schnitzen und die Größe ist nicht zu groß, so dass der Cutter die beste Politur bekommen kann.
Der äthiopische Kristallopal ist einfach zu bearbeiten, und die meisten Schnitzereien haben keine Krumen, sondern vollopale Farben und sind leicht zu polieren. Ethiopian Opal Proben mit Phantom Einschluss im Inneren können geschnitzt werden, um einzigartige Probe zu machen und sie sehen so einzigartig auf dem Display und wir fügen interessante Artikel darüber, wie Phantom Einschlüsse gebildet werden.
Die beliebtesten Schnitzereien sind künstlerische Schnitzereien oder Stammes-Designs. Viele Designs, die wie Stammesdesigns aussehen, sind beliebt. Stämme wie Indianer, Eskimos und Aborigine-Designs sind beliebt. Das nächste beliebteste Design ist moderne künstlerische Designs, die in der Natur gefunden werden, Designs wie Muscheln oder Blätter.
Tierische Designs sind nicht einfach zu machen und die meisten Opal Schnitzereien mit Tieren werden in Asien aufgrund der Arbeitskosten gemacht, um Design zu machen.
Opal Indian Head Carvings sind sehr beliebt. Sie sind meist in Boulder Opal geschnitzt wegen der großen Größe, die erforderlich ist, da die meisten wenige Zoll breit sind
Einige Kristalle können geschnitzt werden, können aber zu teuer sein
Es ist am besten, die Form eines Indianerkopfes zu formen und vor dem Dremel-Drill zu polieren
Boulder Opal mit einer guten Farbe Eisenstein mit einem breiten Abschnitt von bunten Opal ist am besten, aber wenn nur Eisenstein zu starten ist gut, um das Bohren und Polieren dieses Entwurfs zu perfektionieren.
Sie benötigen eine komplette Palette von allen lapidaren Bohrern von diamantbestückten spitzen Bohrern bis zu runden Graten und zum Polieren benötigen Sie auch Polierscheiben als Gummischeiben für Wollpolierspitzen
Beachten Sie auch, dass die Federn erfordern eine schwierige Arbeit und sind am schwierigsten Teil dieses indischen Kopf Carving, als ob nicht polierte das Ergebnis ist Grat Look und Sie müssen viel Aufwand in Carving und poliert die Federn auf diesem Design
Standard Sägeblätter und Polierscheiben sind erforderlich. Die meisten Opalschneider haben diese Ausrüstung bereits, so dass sie den Opal in eine Reibschicht einreiben oder schneiden können, die zum Schnitzen und Polieren bereit ist.
Überprüfen Sie auch, ob Ihre Luftabsaugung gut funktioniert, wenn Sie Opal besonders beim Bohren der Opalfarben schnitzen.
Sobald Sie Ihre Opale ausgewählt haben, die Sie schnitzen möchten, benötigen Sie folgende Ausrüstung:
Wenn Sie einen Dremelbohrer haben, können Sie ihn aufstellen, indem Sie ihn auf Ihrer Bank festklemmen. Es muss auch so untergebracht werden, als ob Sie das reiben bearbeiten. Der Boulder Opal kann sehr chaotisch sein.
Das Bild ist aus Schaumstoff Obst oder Gemüse Box umbohrt um Bohrer. Dieser Bohrer ist nur ein Standard-Elektromotor mit guter Wasserquelle und in einer Schaumbox platziert. Ein alter Zahnarzt Bohrer ist auch ideal, wie es beide Hände zu halten und arbeiten den Opal für Carving.
Der größte Fehler, den neue Carver machen, ist Dremel Drill zu halten und zu schnitzen und aufzugeben, da das Finish nicht zufriedenstellend ist.
Der nächste Fehler ist nie genug Polnisch, da Sie viel Geduld und Abwechslung Polierscheiben oder Schleifpapier benötigen, um ein gutes Finish zu bekommen.
Bohrergrit ist ebenfalls wichtig, da groberer Splitt unter 100 dazu führen kann, dass der Opal zerbricht und kein gutes Finish ergibt
Grobe Körnungen eignen sich gut für grundlegende Arbeiten und schneiden Topf oder Eisenstein ab, aber sobald Sie mit Opalfarben arbeiten, verwenden Sie am besten über 180 Körnung, um den Opal nicht zu beschädigen.
Viele Exemplare benötigen kein Carving-Design, aber am besten den Opal zu reinigen und den Adern zu folgen, bevor Sie sich für ein Design entscheiden
Opal-Schnitzereien benötigen viel Geduld, um das gute Finish zu erhalten. Bitte haben Sie deshalb Geduld und tragen Sie eine Schutzmaske, während Sie mit Bohr- oder Polierscheiben schnitzen.
Schnappen Sie sich Ihre eigene raue und starten Carving
War dieser Artikel hilfreich?
9 Leute fanden diesen Artikel hilfreichAgree a video would help. Also would be helpful to know which size Dremel wheels make what degrees of cuts. The photos are a bit cluttered and small to really understand them. Bulleted list is confusing - it appears these should be grouped or something?