Non hai fatto offerte per questa asta.
253.43 CTS ANDAMOOKA MATRIX ROUGH -SIMILAR PATTERN [BY9403]
- SKU
- Dimensioni (mm)
- 38 x 30 x 8mm
- Peso (cts)
- 253.43
- Type
- Rough
- Colori
-
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural opal treated so it becomes black- We purchase large quanites of rough material and slab it and then treat it so you can get a idea of how it will face. There is a large amount of wastage in preparing this material. You can cut into earrings ring or pendant stones or leave as specimens but you will have to re treat if you take too much away
You may see black spots which is usually blackened sugar which will come off.
Mined in Andamooka Sth Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results if the material is porous
-
POLISHING
The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
| Fornitore di spedizioni | Spedizione a Australia | Spedizione nel resto del mondo | Spedizione combinata ( Australia ) | Spedizione combinata (resto del mondo) |
|---|---|---|---|---|
| FedEx |
|
|
|
|
| Registered Shipping |
|
|
|
|
- SKU
- Dimensioni (mm)
- 38 x 30 x 8 mm
- Peso (cts)
- 253.43
- Type
- Rough
- Colori
-
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural opal treated so it becomes black- We purchase large quanites of rough material and slab it and then treat it so you can get a idea of how it will face. There is a large amount of wastage in preparing this material. You can cut into earrings ring or pendant stones or leave as specimens but you will have to re treat if you take too much away
You may see black spots which is usually blackened sugar which will come off.
Mined in Andamooka Sth Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results if the material is porous
-
POLISHING
The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
| Fornitore di spedizioni | Spedizione a Australia | Spedizione nel resto del mondo | Spedizione combinata ( Australia ) | Spedizione combinata (resto del mondo) |
|---|---|---|---|---|
| FedEx |
|
|
|
|
| Registered Shipping |
|
|
|
|
Discover the magic of opals at SedaOpals, where every stone tells a unique story.
-
PositivoPaid and shipped - no feedback left after 100 days
-
PositivoNeat chart.
-
PositivoLooking forward to reading these books.
-
PositivoGreat colors.
-
PositivoReally great colors.
-
PositivoNever to old to look this great.
Perché gli utenti superano se stessi?
Quando viene fatta un'offerta, questo è l'importo massimo che una persona è disposta a offrire per il prodotto. Il nostro sistema farà quindi automaticamente un'offerta per conto dell'offerente, aumentando gradualmente l'offerta fino al massimo per mantenere la sua posizione di miglior offerente.
Quando c'è un'icona che indica "Offerta automatica", significa che il nostro sistema sta attivamente piazzando offerte per l'offerente in base alla sua offerta massima. Questo potrebbe sembrare come se gli offerenti stessero superando se stessi, ma è semplicemente il risultato del sistema che aggiorna l'offerta per riflettere il limite massimo degli offerenti.