Opals
Gemstones
Jewelry
Coins
RRP stimato
10%
Codice coupon
SEDADEALS
Approfitta di uno sconto di
Valido fino a
31st Dec 2025
156.90 CTS ANDAMOOKA ROUGH SLAB -IDEAL FOR EARRINGS [BY8989]
3559 views
16 guardando
Dettagli
- SKU
- Dimensioni (mm)
- 45 x 42 x 7mm
- Peso (cts)
- 156.9
- Type
- Rough
- Colori
-
Descrizione
ANDAMOOKA MATRIX ROUGH SLAB
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural andamooka matrix rough slab.We have treated only once to show the colour bars. This piece is ideal for cutting earrings as the colour bar is in stripes and you can cut a few sets out and re treat for stunning earrings. There is a lot of wastage in the bulk rough we buy so we only pre shape for you.
You can reshaped it or cut into smaller stones but you will have to retreat it.
Mined in Andamooka South Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Preshape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in acetone for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DO NOT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or Pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results on porous materiel
This material is very solid
-
POLISHING
The surface is usually porous porous so its hard to get a good finish but this should give good results and you may be able to polish as is..
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural andamooka matrix rough slab.We have treated only once to show the colour bars. This piece is ideal for cutting earrings as the colour bar is in stripes and you can cut a few sets out and re treat for stunning earrings. There is a lot of wastage in the bulk rough we buy so we only pre shape for you.
You can reshaped it or cut into smaller stones but you will have to retreat it.
Mined in Andamooka South Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Preshape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in acetone for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DO NOT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or Pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results on porous materiel
This material is very solid
-
POLISHING
The surface is usually porous porous so its hard to get a good finish but this should give good results and you may be able to polish as is..
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
Spedizione
| Fornitore di spedizioni | Spedizione a Australia | Spedizione nel resto del mondo | Spedizione combinata ( Australia ) | Spedizione combinata (resto del mondo) |
|---|---|---|---|---|
| FedEx |
|
|
|
|
| Registered Shipping |
|
|
|
|
Dettagli
- SKU
- Dimensioni (mm)
- 45 x 42 x 7 mm
- Peso (cts)
- 156.9
- Type
- Rough
- Colori
-
Descrizione
ANDAMOOKA MATRIX ROUGH SLAB
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural andamooka matrix rough slab.We have treated only once to show the colour bars. This piece is ideal for cutting earrings as the colour bar is in stripes and you can cut a few sets out and re treat for stunning earrings. There is a lot of wastage in the bulk rough we buy so we only pre shape for you.
You can reshaped it or cut into smaller stones but you will have to retreat it.
Mined in Andamooka South Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Preshape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in acetone for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DO NOT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or Pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results on porous materiel
This material is very solid
-
POLISHING
The surface is usually porous porous so its hard to get a good finish but this should give good results and you may be able to polish as is..
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural andamooka matrix rough slab.We have treated only once to show the colour bars. This piece is ideal for cutting earrings as the colour bar is in stripes and you can cut a few sets out and re treat for stunning earrings. There is a lot of wastage in the bulk rough we buy so we only pre shape for you.
You can reshaped it or cut into smaller stones but you will have to retreat it.
Mined in Andamooka South Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Preshape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in acetone for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DO NOT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or Pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results on porous materiel
This material is very solid
-
POLISHING
The surface is usually porous porous so its hard to get a good finish but this should give good results and you may be able to polish as is..
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
Spedizione
| Fornitore di spedizioni | Spedizione a Australia | Spedizione nel resto del mondo | Spedizione combinata ( Australia ) | Spedizione combinata (resto del mondo) |
|---|---|---|---|---|
| FedEx |
|
|
|
|
| Registered Shipping |
|
|
|
|
Negozio
![156.90 CTS ANDAMOOKA ROUGH SLAB -IDEAL FOR EARRINGS [BY8989]](https://liveplatforms-production.b-cdn.net/tenants/oa/uploads/stores/fh5enknthszqznio.png)
Discover the magic of opals at SedaOpals, where every stone tells a unique story.
Qld, Australia
Posseduto da sedaopals
Verificato
Feedback recenti
-
PositivoNeat chart.
-
Positivo
Looking forward to reading these books.
-
Positivo
Great colors.
-
Positivo
Really great colors.
-
Positivo
Never to old to look this great.
Verifica
Il programma Opal Sheriff consente ai nostri membri di richiedere un controllo su qualsiasi prodotto, che viene completato da un Gemologist indipendente che valuta l'accuratezza della descrizione e delle immagini dell'articolo.
Dettagli di spedizione
Costi:
Transito:
21 giorni tramite Registered Shipping
Spedizioni da:
Australia
Opzioni di pagamento
Questo venditore aggiunge 10.00% tax alle transazioni in Australia .
Panoramica
Tipo di elenco :
Standard
Codice prodotto :
905420
Inizia : 17th December 2025 08:15 pm PST
* Tutti i prezzi sono in USD