Opal Doublet as the name suggests, is a thin layer of precious Opal cemented onto a backing, usually a piece of common Black Opal or Ironstone. They were originally created from Opal that was perhaps too thin to produce a solid stone. Opal doublets are a cheap and inexpensive way to buy a colorful piece of precious Opal without the cost of a solid Opal. Some of the patterns and the brightness of the Opal doublets is incredible.
Imagine taking a thin piece of opal maybe only a few mm’s thick and gluing it to a thicker backing. This is exactly what an Opal doublet is. The easiest way to detect an Opal doublet is to turn it on the side and look for the join between the Opal and the backing. This is also an important time to mention Opal Triplets. Like an Opal Doublet, a Triplet is made by gluing Opal to a sold backing. However if the Opal is extremely thin sometimes a clear cap is placed over the Opal. The cap can be made of Quartz of plastic sometimes even plastic.
Opal doublets are generally set onto strong Ironstone backing which is a brown in colour. The thin slice of Opal is enhanced by the brown Ironstone and greatly increases the colour of the Opal. A slice of Opal in a doublet is a lot thicker than a Opal Triplet.
Other material such as Black Opal potch can be used as well as plastic. Ironstone is by far the most common choice because it is a natural stone and it can be found in abundance.
Opal doublets are ideal to make matching sets of Opal earrings, pendants or rings as it is easy to match the colour closely. In nature it is very rare to get matching opals, so doublets are popular in the opal industry to make matching sets.
When opal doublets are used in jewelry you will most likely find a bessel set. This is where the metal is rounded up and over the opal. This has the 2 effects
It hides and protects the join between the natural Opal and the backing
It gives the illusion of a large natural solid Opal
Opal doublets originally were made in Lightning Ridge, Australia by using opal crystal and set on natural Black Opal potch. These days the ability to make opal doublets is shared across the world and Ironstone is also used for the backing.
Opal doublets are just as strong as a solid opal but because they have been ‘glued’ together with a backing piece of Ironstone it is important not to clean your piece of jewelry with ultrasonic cleaners or strong chemicals. Simply wipe over with a cloth and warm soapy water.
Opal Doublet ist, wie der Name schon sagt, eine dünne Schicht aus kostbarem Opal, die auf einem Träger zementiert ist, normalerweise ein Stück gewöhnlicher Black Opal oder Ironstone. Sie wurden ursprünglich aus Opal geschaffen, der vielleicht zu dünn war, um einen festen Stein herzustellen. Opal-Dubletten sind eine kostengünstige und kostengünstige Möglichkeit, ein kostbares Opal ohne die Kosten eines soliden Opals zu kaufen. Einige Muster und die Helligkeit der Opaldubletts sind unglaublich.
Stellen Sie sich vor, Sie nehmen ein dünnes Stück Opal, das nur wenige Millimeter dick ist, und kleben es auf einen dickeren Träger. Genau das ist ein Opal-Dublett. Ein Opal-Dublett lässt sich am einfachsten erkennen, indem man es auf die Seite dreht und nach der Verbindung zwischen dem Opal und dem Träger sucht. Dies ist auch eine wichtige Zeit, um Opal-Drillinge zu erwähnen. Wie ein Opal-Doublet wird ein Triplet hergestellt, indem Opal auf einen verkauften Träger geklebt wird. Wenn der Opal jedoch extrem dünn ist, wird manchmal eine klare Kappe über dem Opal platziert. Die Kappe kann aus Quarz aus Kunststoff bestehen, manchmal sogar aus Kunststoff.
Opal-Dubletten werden im Allgemeinen auf einen starken Ironstone-Träger gesetzt, der eine braune Farbe hat. Die dünne Scheibe des Opals wird durch den braunen Eisenstein verstärkt und erhöht die Farbe des Opals erheblich. Eine Scheibe Opal in einem Dublett ist viel dicker als ein Opal-Triplett.
Andere Materialien wie Black Opal Potch können ebenso verwendet werden wie Kunststoff. Eisenstein ist bei weitem die häufigste Wahl, da er ein Naturstein ist und reichlich vorhanden ist.
Opal-Dubletten eignen sich ideal für die Herstellung von passenden Opal-Ohrringen , -Anhängern oder -Ringen, da die Farbe leicht zu erkennen ist. In der Natur ist es sehr selten, passende Opale zu bekommen, daher sind Dubletten in der Opalindustrie beliebt, um passende Sets herzustellen.
Wenn Opal-Dubletten in Schmuckstücken verwendet werden, finden Sie höchstwahrscheinlich ein Bessel-Set. Hier wird das Metall abgerundet und über den Opal gelegt. Dies hat die 2 Auswirkungen
Opal-Dubletten wurden ursprünglich in Lightning Ridge, Australien, unter Verwendung von Opalkristall hergestellt und auf einen natürlichen schwarzen Opal- Potch gesetzt. Heutzutage ist die Fähigkeit, Opal-Dubletten herzustellen, auf der ganzen Welt verbreitet, und Ironstone wird auch für die Unterstützung verwendet.
Opal-Doublets sind genauso stark wie ein solider Opal. Da sie jedoch zusammen mit einem Gegenstück aus Ironstone "verklebt" wurden, ist es wichtig, dass Sie Ihr Schmuckstück nicht mit Ultraschallreinigern oder starken Chemikalien reinigen. Einfach mit einem Tuch und warmem Seifenwasser abwischen.
War dieser Artikel hilfreich?
12 Leute fanden diesen Artikel hilfreich