Opals
Gemstones
Jewelry
Coins
Sin piedras preciosas de reserva
Sin ópalos de reserva
Joyas sin reserva
Sin monedas de reserva
No has pujado en esta subasta.
$45.00
Oferta actual
1
Ofertas
Cerrado
21/03/2021 08:52 pm
1
1493
5
200.00 CTS ANDAMOOKA ROUGH SLAB PARCEL-IDEAL FOR EARRINGS [BY9002]
1
1493
5
- SKU
- Dimensiones (mm)
- 40.000 x 25.000 x 7.000mm
- Peso (cts)
- 200.000
- Tipo
- Rough
- Colores
-
ANDAMOOKA MATRIX ROUGH SLAB
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural andamooka matrix rough slab.We have treated only once to show the colour bars. This piece is ideal for cutting earrings as the colour bar is in stripes and you can cut a few sets out and re treat for stunning earrings. There is a lot of wastage in the bulk rough we buy so we only pre shape for you.
You can reshaped it or cut into smaller stones but you will have to retreat it.
Mined in Andamooka South Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Preshape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in acetone for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DO NOT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or Pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results on porous materiel
This material is very solid
-
POLISHING
The surface is usually porous porous so its hard to get a good finish but this should give good results and you may be able to polish as is..
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural andamooka matrix rough slab.We have treated only once to show the colour bars. This piece is ideal for cutting earrings as the colour bar is in stripes and you can cut a few sets out and re treat for stunning earrings. There is a lot of wastage in the bulk rough we buy so we only pre shape for you.
You can reshaped it or cut into smaller stones but you will have to retreat it.
Mined in Andamooka South Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Preshape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in acetone for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DO NOT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or Pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results on porous materiel
This material is very solid
-
POLISHING
The surface is usually porous porous so its hard to get a good finish but this should give good results and you may be able to polish as is..
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
- SKU
- Dimensiones (mm)
- 40.000 x 25.000 x 7.000 mm
- Peso (cts)
- 200.000
- Tipo
- Rough
- Colores
-
ANDAMOOKA MATRIX ROUGH SLAB
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural andamooka matrix rough slab.We have treated only once to show the colour bars. This piece is ideal for cutting earrings as the colour bar is in stripes and you can cut a few sets out and re treat for stunning earrings. There is a lot of wastage in the bulk rough we buy so we only pre shape for you.
You can reshaped it or cut into smaller stones but you will have to retreat it.
Mined in Andamooka South Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Preshape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in acetone for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DO NOT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or Pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results on porous materiel
This material is very solid
-
POLISHING
The surface is usually porous porous so its hard to get a good finish but this should give good results and you may be able to polish as is..
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural andamooka matrix rough slab.We have treated only once to show the colour bars. This piece is ideal for cutting earrings as the colour bar is in stripes and you can cut a few sets out and re treat for stunning earrings. There is a lot of wastage in the bulk rough we buy so we only pre shape for you.
You can reshaped it or cut into smaller stones but you will have to retreat it.
Mined in Andamooka South Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Preshape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in acetone for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DO NOT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or Pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results on porous materiel
This material is very solid
-
POLISHING
The surface is usually porous porous so its hard to get a good finish but this should give good results and you may be able to polish as is..
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
| Proveedor de envío | Envío a: país | Envíos al resto del mundo |
|---|---|---|
| FedEx | $12.00 / :días días | $39.00 / :días días |
|
:país
:proveedor tiene un descuento de $12.00 en pedidos con 2 o más artículos
Resto del mundo
:proveedor tiene un descuento de $39.00 en pedidos con 2 o más artículos
|
||
| Express Shipping | $12.00 / :días días | $39.00 / :días días |
|
:país
:proveedor tiene un descuento de $12.00 en pedidos con 2 o más artículos
Resto del mundo
:proveedor tiene un descuento de $39.00 en pedidos con 2 o más artículos
|
||
| Registered Shipping | $9.00 / :días días | $16.00 / :días días |
|
:país
:proveedor tiene un descuento de $9.00 en pedidos con 2 o más artículos
Resto del mundo
:proveedor tiene un descuento de $16.00 en pedidos con 2 o más artículos
|
||
seda rough opals
SEDA ROUGH OPALS is run by Paul Sedawie of Seda Opals. 8 opals can be combined in the one shipping if bought with in 7 days. The Seda Opal company was incorporated in 1994.The owner Paul sedawie is the current president of the OPAL ASSOCIATION INC. Seda Opals is an abbreviation from our surname Sedawie. The business is mainly wholesale and it is through this site that we can bring the opal fields and the bargins direct to you. Paul Sedawie started mining at the Four mile field in Lightning Ridge in 1986 with his first partner Bob Young. It took them 6 months to find a decent stone and this experience gave me a healthy respect for the stone and how hard it is to find. Previous to mining opal, Paul ran a successful mail order business in plants for 7 years which gave him a lot of experience servicing customers through parcel post. We use mainly Australia post as it has a excellent reputation for delivery to most parts of the world. I don't do any active mining now but my eldest son Peter Sedawie has taken over. This leaves me free to travel to any opal field and to enjoy the beauty of this magnificent stone. We hope you enjoy our stock and good luck with your biding.
:Ciudad, País
Verificado
15245 de comentarios
-
PositivoThis thing is huge!
![87.00 GRAMS KORIOT CHUNKY OPAL ROUGH-UNTOUCHED[BY9983]](https://liveplatforms-production.b-cdn.net/tenants/oa/uploads/images/960000-964999/962926/5fab6d86caace.jpg?width=480&aspect_ratio=1001%3A1000&auto_optimize=medium)
-
Positivo
Excellent service as always
-
Positivo
Excellent service as always
-
Positivo
Excellent service as always
-
Positivo
Excellent service as always
Historial de ofertas (1)
glenngems
Comprado a este vendedor anteriormente
hace 3 años
$44.00
¿Por qué los usuarios se superan a sí mismos?
Cuando se realiza una oferta, esta es la cantidad máxima que un usuario está dispuesto a ofertar por el producto. Luego, nuestro sistema ofertará automáticamente en nombre de ese usuario, aumentando gradualmente la oferta para mantener su posición como el mejor postor, hasta el máximo especificado.
Cuando hay un ícono que indica "Oferta automática", significa que nuestro sistema está realizando ofertas activamente para el usuario en función de su oferta máxima. Esto puede parecer como si los usuarios se estuvieran superando a sí mismos, pero es simplemente el resultado de que el sistema actualiza la oferta para reflejar el límite máximo de los usuarios.
Auditoría
El programa Opal Sheriff permite a nuestros miembros solicitar una auditoría de cualquier producto, que se completa con una :cualificación independiente que evalúa la precisión de la descripción y las imágenes del artículo.
Detalles de envío
Envío:
$16.00 :cuenta días a través de :proveedor
Se envía desde:
Australia
Opciones de pago
Este vendedor agrega 10.00% tax a las transacciones en Australia.
Descripción general
Tipo de listado :
Standard
ID del Producto :
905443
PVP estimado :
$175.00
Precio inicial : $44
Empieza : 20th March 2021 03:04 pm AEST
Finaliza : 22nd March 2021 01:52 pm AEST
* Todos los precios están en :moneda
![148.4 CTS INDONESIAN NATURAL BLACK POTCH PARCEL DEAL [VS7111]](https://liveplatforms-production.b-cdn.net/tenants/oa/uploads/images/580000-584999/584720/5702fe2dda4bc.jpg?auto_optimize=medium?width=480&aspect_ratio=1001%3A1000&auto_optimize=medium)
![76.30 CTS BOULDER WOOD FOSSIL REPLACEMENT [BMA4144 ]](https://liveplatforms-production.b-cdn.net/tenants/oa/uploads/images/620000-624999/624907/583b71c6eb5ac.jpg?auto_optimize=medium?width=480&aspect_ratio=1001%3A1000&auto_optimize=medium)
![417.70 CTS FLASHY MATRIX OPAL SCULPTURES[Q110]A](https://liveplatforms-production.b-cdn.net/tenants/oa/uploads/images/685000-689999/689319/5a4d6ce074226.jpg?auto_optimize=medium?width=480&aspect_ratio=1001%3A1000&auto_optimize=medium)
